How to program Ford Key fob push button start? What is this?

How to program Ford Key fob push button start? Nowadays, electronic car keys have become the norm, a massive shift from just a few decades ago when anyone with a little know-how could turn over the ignition on a car with some crossed wires and a screwdriver. These days, even with a precision cut key, most vehicles won’t start without the presence of the proper computer chip.

As a matter of fact, some cars no longer require you to insert the key at all. An electronic fob’s mere presence is enough to use a push-button ignition on many current vehicle models.

This is all great news for car owners, since it means your car, truck, or SUV is much more difficult to steal than in generations past. On the other hand, electronic keys introduce new components that can be expensive, even without paying a dealer to program them. If you can do the job yourself, you can save both time and money by not having to visit the dealership.

How to program Ford Key fob push button start?

You will need the new unprogrammed key fob and two previously programmed key fobs in order to program a Ford key fob for push button start.

  1. Take off the key fob’s blade.
  2. Turn on the central console.
  3. With the buttons facing up and the unlock button towards the front of the car, insert the first programmed key fob into the backup slot.
  4. To turn on the ignition, use the push button.
  5. Press the push-button ignition switch once more after five seconds.
  6. Take the key fob off.
  7. Press the push-button ignition switch and insert the second programmed key fob into the backup slot within ten seconds.
  8. Press the push-button ignition switch once more after five seconds.
  9. Take the key fob off.
  10. Press the push-button ignition switch and insert the unprogrammed key fob into the backup slot within ten seconds.
  11. The programming has finished now.
See also  Where to add Transmission Fluid Ford f150? What is this?

The horn will sound and the warning lights will blink if the programming is successful. The horn and the warning lights won’t flash if the programming isn’t successful.

Here are some more pointers for setting up push-button start on a Ford key fob:

  • Before you start programming, make sure the car is in park and the engine is off.
  • Verify that each key fob has a fresh set of batteries.
  • Try restarting the car if you’re having problems programming the key fob.
  • If the issue persists, get in touch with local Ford dealer

program Ford Key fob push button start

Programming a Second or Third Key

The most straightforward key programming process is a situation where you are looking to program a second key. Since you already have a (master) key you can use, manufacturers assume you own the vehicle and make the process quick and easy. Note that some manufacturers require two keys to use this method, in which case it’s only useful for making a third key.

  • Sit in your driver’s seat, and set your new, blank key somewhere within easy reach. If you have two existing keys, set the second existing key along with the blank. You’ll need to swap them out quickly, so keep them close.
  • When ready, insert your working key into the ignition, and turn the key to the on position. Don’t actually start the motor. Simply turn the key to the point where the car’s electrical system is activated. The instant that power is activated, turn the key back to the off position and remove it from the ignition.
  • Now is when you’re going to need to move quickly. You’ll have a total of five seconds to remove the first key and insert the second key.
  • Depending on your vehicle, this second key may be your new key or second working key. Repeat the same process outlined above, turning the key until the electronics come on, then turning it off again.
  • If you have a third key, repeat this same swapping process with the third key. If not, leave the second key in the ignition. Regardless of which of the two options you choose, when your new key is inserted and turned off, your car should go into security mode.
  • The security light should turn on the dashboard and remain illuminated for about three seconds while the key is programmed. On certain vehicle models, you may have to press the buttons on the key to confirm. Once the security light shuts off, remove the key, then reinsert it to test if the process was successful.
See also  How to update SYNC on Ford? What Is this Ford SYNC about?

program Ford Key fob push button start

Programming a Push-Button Starter

In some cases, you can program a keyless ignition fob for cars with a push-button starter. This is by no means foolproof, but it’s worth trying before you pay a dealer to program it for you.

  • With the fob in your hand, get into the driver’s seat, closing the door behind you. Have one hand ready on the fob, and the other on the vehicle’s start button. Similar to the processes above, you’ll need to work quickly, so prepare accordingly.
  • When you’re ready, press your car’s start button 15 times in quick succession, with no more than two seconds between each attempt. Keep your foot off the brake while you’re doing this; remember, you’re not actually trying to start the engine.
  • After the 15th button press, push the lock button on your fob. If the pairing process was successful, the car doors will lock, and the fob will be fully functional. If it was unsuccessful, it’s worth a shot to repeat the process and see if there was an error in the initial attempt.
  • This tactic’s timing can be a bit finicky and difficult to get right on the first attempt.

Don’t Forget to Check Your Battery!

Many times, a non-functioning electronic fob doesn’t actually need to be replaced. Before you spend a small fortune on purchasing a new fob, it’s worth checking to see if an affordable battery replacement will solve your problem.

To open the fob, you’ll need to look for a tiny “key” built into the unit’s seam. Once located, pull out the key, and use it to pry open the housing. Take your time and be careful to avoid causing any damage to the housing. Once accessed, Inside, you’ll see a circuit board. Remove this carefully, and you’ll find the battery attached to the bottom.

See also  What cars does Ford make? How many brands did Ford have?

Most key fobs use a small watch battery, which you can find at most pharmacies and home improvement stores. A majority of them only cost a couple of dollars, so it’s smart to try replacing your old battery with a fresh one before replacing the entire fob.

program Ford Key fob push button start

Above is information about How to program Ford Key fob push button start? What is this? that we have compiled. Hopefully, through the above content, you have a more detailed understanding of program Ford Key fob push button start. Thank you for reading our post.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *