When changing lanes you can check your blind spots by?

When changing lanes you can check your blind spots by? A blind spot is anywhere around your car where your mirror cannot pick up. Most of the time, students think that if they’re checking the mirror, they do not need to check the blind spot, and that’s where they go wrong.

So, when you’re enrolled in a driving school some instructors will teach you how to check blind spots when driving so you are safe when on the road.

The blind spot is very critical when you’re driving and when you’re taking your road test.

When changing lanes you can check your blind spots by?

When you’re behind the wheel, it’s best to keep your head facing in front. If you turn your head too frequently, it might throw off your lane alignment.

Because of this, there are mirrors so you can maintain a general watch on what’s happening behind you with a fast glance.

When changing lanes you can check your blind spots by

However, a simple glance in the mirror isn’t always sufficient. When switching lanes or another vehicle is merging in your lane, you should check your blind spot by looking in your mirrors and over your shoulder in the direction that is relevant to the situation.

Note that:

  • Before you do anything else, look in your rearview mirror
  • Examine the mirror located on the relevant wing
  • Look over your shoulder

That should take up the whole region behind you, allowing you to switch lanes without preventing anyone from securely.

See also  What is the fastest F1 car? Top 10+ fastest cars of all time

How to change lanes properly in 8 simple steps?

  • If you find that you are behind another vehicle that is driving at a slower speed than you are and you are still driving well below the posted speed limit, it is acceptable to briefly change into the left lane in order to pass the car. First, turn on your left turn signal to inform other drivers of your intentions to move into the left lane.
  • Check your rear view and side mirrors for other vehicles currently in the lane in which you are planning to transition.
  • Check your vehicle’s blind spot. Here’s a small guide that helps you deal with blind spots efficiently: It is very important to check you blind spot ever time you prepare to change lanes. Check your mirrors again.
  • While maintain your speed, smoothly steer left so that your vehicle leaves the right lane and moves into the left lane.
  • Turn off your turn signal. Briefly continue driving in the left lane as you pass the slower vehicle.
  • Turn on your right turn signal to inform other drivers of you intentions to transition back into the right lane.
  • Check your rear view and side mirrors for other motorists. Check your vehicle’s blind spot. Quickly check your mirrors again.
  • While maintaining your speed, smoothly steer right so that your vehicle leaves the left lane and returns to the right lane.

How to check blind spots

Checking your blind spots involves looking in the mirror and then over your shoulder. It’s that easy. Also, check the view out the window, and ensure no obstructions on the road.

Do not turn all around while checking the blind spot. This is because you want your entire focus to be on the direction where your car is headed to.

It won’t be long until it becomes natural to include it in your everyday observation practice.

Moving Off

You should look in every direction before stepping off the road. As part of your driver’s education, you will learn how to maneuver in a clockwise direction. However, you need to check out:

  • Over the left shoulder
  • Look in the left-wing mirror
  • The rearview mirror
  • Your right-wing mirror
  • Over the right shoulder
See also  What does DRL mean on a car? How do DRL work & DRL indicator

After an Emergency Halt

Before suddenly stopping, you won’t always have the opportunity to double-check your rearview mirror.

As a result, before you start driving again, you must ensure that your blind spots and mirrors are checked thoroughly.

Getting Back On the Road After Being Stuck In Traffic

Before going forward in traffic, you must double-check all three mirrors. In this situation, you don’t need to peek over your shoulder into your blind areas.

However, you should be aware of bicyclists or motorcyclists who could have come up beside you while you were stopped and pay attention to their presence.

At Junctions

When approaching intersections, the pillars on each side of your windscreen will obscure your view.

Therefore, you’ll need to:

  • Reduce your speed as you approach to do the necessary observational checks on time.
  • Tilt your head ever-so-slightly forward and look further ahead to see over your A-pillars and into the blind zones.
  • Make sure to look left and right at least twice since this will give any approaching cars enough time to enter your field of sight.

When is the best time to check blind spots?

You should constantly be aware of what’s happening around you when you’re behind the wheel. In most cases, you should be able to accomplish this by focusing on the roadway before you and often checking your mirrors.

When changing lanes you can check your blind spots by

Nevertheless, there are certain circumstances in which it is essential to swivel your head and check if there is anything in the areas you can’t see. These include:

  • Before moving, you must confirm that you will not go directly into another person’s path.
  • Before making a lane change, motorists or cyclists may have drawn up beside you when you’re trying to pass another vehicle or get into the correct lane at an intersection. It is not enough to stare in your mirrors and hope for the best while driving on multi-lane highways since other drivers may be changing lanes behind you.
  • When other cars are entering your lane from an adjacent one, drivers who wish to pull out from slip roads or merge into your lane in any other way require a clear distance in which to do so.
See also  How much does a Smart car weigh? Benefits of Knowing Weight

How many times should you check your blind spots?

To maintain situational awareness while driving in traffic, it is important to check your mirrors regularly. Make a habit of glancing at your mirrors every 5 to 8 seconds to stay informed about the surrounding vehicles.

Additionally, ensure you check your mirrors before braking or slowing down to understand the traffic behind you clearly. When preparing for turns or lane changes, always check your mirrors and blind spots beforehand to assess potential risks or obstacles.

Furthermore, when transitioning into or out of the curb lane, check your mirrors and blind spot for a smooth and safe maneuver. Regularly monitoring your mirrors and diligently checking blind spots will help you stay informed, anticipate potential hazards, and make informed decisions on the road.


What must you do when a blind spot occurs when driving?

This means you’ll have to physically turn around and check your blind spots before executing the lane change. A brief check around your shoulder and several looks in your mirror every 3-5 seconds is enough to ensure you’re safe to move over.

How to make a blind spot check for a lane change to the right?

A blind spot check is a quick turn of the head from chin to shoulder, either to the right (or) chin to shoulder to the left, before we make any lane change.

Do you check blind spot first?

Check your blind spot before changing lanes once you’re on the motorway as well. Put your indicator on, check your mirrors, check your blind spot, then merge only once you’re confident that the way is clear. It’s important to also bear in mind that you might be in another road user’s blind spot.

Above is information about When changing lanes you can check your blind spots by? that we have compiled. Hopefully, through the above content, you have a more detailed understanding of How to change lanes properly in 8 simple steps? Thank you for reading our post.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *